Elo TouchSystems D-Series Guia do Utilizador Página 17
- Página / 26
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
E-Series Touchcomputer User Guide 13
Technology Equipment (ITE) is required to have a CE Mark on the
manufacturer’s label which means that the equipment has been tested to the
following Directives and Standards:
This equipment has been tested to the requirements for the CE Mark as required
by EMC Directive 2004/108/EC indicated in European Standard EN 55022 Class
B and the Low Voltage Directive 2006/95/EC as indicated in European Standard
EN 60950-1.
D) General Information to all Users: This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used according to this manual,
the equipment may cause interference with radio and television communications.
There is, however, no guarantee that interference will not occur in any particular
installation due to site-specific factors.
1) In order to meet emission and immunity requirements, the user must
observe the following:
a) Use only the provided cables to connect the Elo touchcomputer.
b) To ensure compliance, use only the provided manufacturer’s approved
power cord.
c) The user is cautioned that changes or modifications to the equipment
not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
2) If this equipment appears to cause interference with radio or television
reception, or any other device:
a) Verify as an emission source by turning the equipment off and on.
b) If you determine that this equipment is causing the interference, try to
correct the interference by using one or more of the following measures:
i) Move the digital device away from the affected receiver.
ii) Reposition (turn) the digital device with respect to the affected
receiver.
iii) Reorient the affected receiver’s antenna.
iv) Plug the digital device into a different AC outlet so the digital
device and the receiver are on different branch circuits.
v) Disconnect and remove any I/O cables that the digital device does
not use. (Unterminated I/O cables are a potential source of high RF
emission levels.)
vi) Plug the digital device into only a grounded outlet receptacle. Do
not use AC adapter plugs. (Removing or cutting the line cord ground
may increase RF emission levels and may also present a lethal shock
hazard to the user.)
- Elo TouchSystems 2
- Table of Contents 4
- Unpacking Your Touchcomputer 5
- Adjusting the Display 6
- Systems 7
- 8
- OPERATION 9
- LED Functionality 10
- SAFETY AND MAINTENANCE 12
- Care and Handling 13
- UL Directive 14
- China RoHS 14
- TECHNICAL SUPPORT 15
- REGULATORY INFORMATION 16
- III. Agency Certifications 18
- WARRANTY 19
- E-Series 25
- Installation 26
Manuais e produtos relacionados com Barebones PC/estação de trabalho Elo TouchSystems D-Series
(61 páginas)
(52 páginas)
(49 páginas)Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST manuales
Manuales del propietario y guías del usuario para Para Motocicletas Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST.
Ofrecemos 1 manuales en pdf Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST para descargar gratis por tipos de documentos: Manual de usuario
Comentários a estes Manuais