Elo TouchSystems 1925L Guia do Utilizador Página 25
- Página / 55
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
2-20 Elo Entuitive Touchmonitor User Guide
Installing the Serial Touch Driver for MS-DOS and
Windows 3.1
You must have a DOS mouse driver (MOUSE.COM) installed for your mouse
if you wish to continue using your mouse along with your touchmonitor in
DOS.
To install Windows 3.x and MS-DOS from Windows 95/98, follow the
directions below:
1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
2 From DOS, type d:\EloDos_W31 to change to the correct directory on the
CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
3 Type install and press Enter to start the installation.
4 Align the touchscreen.
You must have already completed Steps 1 and 2 before proceeding. Refer to
Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for
additional installation information.
To run the INSTALL program:
1 Type INSTALL at the DOS prompt in the directory containing the driver
install files.
2 INSTALL asks you to select the software to install. Then choose
d:\EloDos_W31 from the displayed list.
3 INSTALL also asks you for the paths to use during installation, or you may
use its defaults. INSTALL creates directories as necessary, and warns you if
they exist.
If you are updating your software, you may wish to specify the paths containing
the earlier versions, and overwrite the obsolete files. All executable programs
are upward compatible. For a list of differences from each previous version of
the drivers, be sure to select "Differences from Previous Versions" during the
installation process.
INSTALL updates your AUTOEXEC.BAT file with the drivers you select.
INSTALL makes a copy of your original AUTOEXEC.BAT file, called
AUTOEXEC.OLD. If you already have Elo driver commands in your
AUTOEXEC.BAT file, they will be commented out.
When INSTALL is finished, it leaves a file called GO.BAT in the subdirectory
you specified. GO loads the touchscreen driver, runs the calibration program
ELOCALIB, and gives you some final instructions.
If you are using Windows 3.1, you will also calibrate the touchscreen within
Windows 3.1 with the Touchscreen Control Panel.
- Elo Entuitive Touchmonitor 1
- User Guide 1
- Disclaimer 2
- Trademark Acknowledgments 2
- Table of Contents 4
- NTRODUCTION 6
- NSTALLATION 8
- Product Overview 9
- Side View 10
- Base Bottom View 10
- Touch Interface Connection 11
- Figure 2.2 12
- Step 1-Routing the Cables 13
- Connections on underside 14
- Optimizing the LCD Display 17
- Figure 2.4 18
- Rear Mount Template 19
- Front Mount Template 19
- Mounting the Base 21
- Security 22
- Windows 2000 24
- , Me, 95/98 and NT 4.0 24
- Windows 3.1 25
- , Me and 98 26
- PERATION 28
- Side Bezel Buttons 29
- OSD Menu Function 30
- ROUBLESHOOTING 32
- ESOLUTION 34
- OUCHMONITOR 36
- ECHNICAL 38
- PECIFICATIONS 38
- Touchmonitor Specifications 39
- Mechanical 41
- Chemical Resistance 42
- Electrostatic 42
- Protection (per EN 61 42
- 000-4-2, 1995) 42
- Aft tilt 90˚ from vertical 46
- EGULATORY 48
- NFORMATION 48
Manuais e produtos relacionados com Monitor tátil Elo TouchSystems 1925L
(25 páginas)
Monitor tátil Elo TouchSystems E221 Manual
(107 páginas)
(107 páginas)
Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST manuales
Manuales del propietario y guías del usuario para Para Motocicletas Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST.
Ofrecemos 1 manuales en pdf Kuryakyn 6387 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST para descargar gratis por tipos de documentos: Manual de usuario
Comentários a estes Manuais