Elo TouchSystems E-Series Especificações descarregar pdf (Página 23)

Elo TouchSystems (800) ELO-TOUCH or (650) 361-4800 • Fax (650) 361-4722 • www.elotouch.com

SURFACE CAPACITIVE

Z-border pattern for

enhanced linearity

5000RSU serial controller

MECHANICAL

Input Method Finger

Available Sizes DirectTouch: 7.8 mm

12" to 19" flat, standard, and custom sizes; visit our Web site

for full specifications and offerings

Glass Thickness 0.118" / 3.0 mm nominal. (Glass only, not including tape, wires,

and/or solder if used)

ELECTRICAL

Positional Accuracy Reported touch coordinates are within 1.5% of true position

(based on viewing area dimensions)

Resolution Touchpoint density is based on controller resolution of

4096 x 4096

Controller Controller board size of 2.1" x 3.3" (5.4 x 8.4 cm), with

auto-detect function for serial (RS232) connection (using Elo

SmartSet drivers)

OPTICAL

Light Transmission Up to 85% per ASTM D1003

ENVIRONMENTAL

Temperature Touchscreen Operating: –15°C to 70°C

Storage: –50°C to 85°C

Controller Operating: 0°C to 65°C

Storage: –25°C to 85°C

Relative Humidity Operating/Storage: 10% to 90% RH, noncondensing

Chemical Resistance Water, ammonia, isopropyl alcohol, and similar nonabrasive

cleaners

Agency Approvals UL, cUL, TÜV, CE, FCC Class A and B, CISPR B

Sealability Can be sealed to meet NEMA 4 and 12 and IP 65 standards

DURABILITY

Surface Durability Antiglare hardcoat cannot be scratched using any stylus with

Mohs rating equal to or less than 6. Tested in the laboratory to

withstand over 160 million (mechanically simulated) touches with-

out noticeable degradation.

Warranty Touchscreen 5-year limited warranty

Controller 5-year limited warranty

*Always store the touchscreen sensor and controller in the original shipping container.

Never store them in an environment where condensation may form.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 115 116

Sem comentários

Elo TouchSystems E-Series Especificações Página 23