Elo TouchSystems E221 Manual Página 29

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 28
4-34 Elo Entuitive Touchmonitor
Without prior approval of the monitor manufacturer, you will probably void the
monitor's warranty by disassembling it. Also, it will be necessary to recertify the
monitor and touchscreen system for regulatory agencies (such as FCC,
UL/CSA, TÜV, CE, etc.) if those certifications were originally present and need
to be maintained for your intended application. (Elo offers touchmonitors with
full agency approvals.)
Handle the touchscreen with care. Avoid excessive handling and stress on the
touchscreen cable.
Bezel Design
The following graphic displays some bezel ideas in order to help you mount the
bezel to the touchscreen.
Figure 4.2
Bezel design
Testing Components
The display must be in good working order before beginning the installation of
the touchscreen. With a new display, it is suggested that you test the display by
running it overnight. Do not leave a constant image at normal brightness on the
screen during this test, as it may burn an image into the screen.
Familiarize yourself with the operation of the touchscreen and controller before
you proceed with the installation. Use the COMDUMP, BUSSTAT, or
TOUCHES programs as described in Appendix A to test serial and PC-Bus
controllers while the touchscreen components are arranged on the work surface.
Currently, there is no separate diagnostic test for USB controllers.
Round corners for nice appearance and easy cleaning
Bevel edge for nice appearance
On bezel and cabinet, choose paint finish and/or surface
texture so fingerprints do not show
Avoid tilt/swivel bases unless they are very stable - the
display should not move or shake when touched
Flat inner lip for sealing tape
Vista de página 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 106 107

Comentários a estes Manuais

Sem comentários