Elo TouchSystems E221 Manual Página 65

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 64
A-70 IntelliTouch/SecureTouch Guide
E271-2210 Controller Protocol
The ten-byte binary data format displayed in hex by COMDUMP for correct
operation with Elo driver software is as follows:
E281A-4002 Controller Protocol
If the controller is jumpered for E281A-4002 emulation mode, the output will
be the six-byte binary format as follows:
In this mode, the first four bytes in each packet will be decreasing, followed by
a zero byte, and a byte from 00 to 0F (hex). The Z value (byte 6) will be 00
when you lift your finger.
E271-140 Controller Protocol
If the controller is jumpered for E271-140 emulation mode, the output will be
the first four bytes of the E281A-4002 protocol. No Z data is transmitted.
E261-280 Controller Protocol
If the controller is jumpered for E261-280 emulation mode, the output will be
three bytes, [01], X, and Y. The [01] byte will change to [81] on release.
Byte Description
1 ASCII 'U' (55h)
2 ASCII 'T' (54h)
3 Status Byte
4XLow
5 XHigh
6YLow
7 YHigh
8ZLow
9 ZHigh (defaults to 0)
10 Checksum
Byte MSB LSB
1 1 1 X11 X10 X9 X8 X7 X6
210 X5X4X3X2X1X0
3 0 1 Y11 Y10 Y9 Y8 Y7 Y6
400 Y5Y4Y3Y2Y1Y0
500 000000
600 00Z3Z2Z1Z0
Vista de página 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 106 107

Comentários a estes Manuais

Sem comentários