Elo TouchSystems E221 Manual descarregar pdf (Página 84)

C-89

A PPENDIX

HAPTER

PECIFICATIONS

The following specifications were correct at press time, but are subject to

change without notice.

Many of the AccuTouch specifications are controller-dependent. Refer to the

AccuTouch Touchscreen Products brochure or the SmartSet Touchscreen

Controller Family Technical Reference Manual for these additional

specifications.

AccuTouch products are covered by one or more of the following patents:

4,071,689: 5,220,136; 4,220,815; 4,661,655; 4,687,885; 4,731,508; 4,822,957;

5,045,644.

Mechanical

Cable and Connector

Cable typically exits from the left side, terminating in a five-position, 0.025

inches (0.635 mm) square post receptacle. The connector shall be capable of at

least 100 insertions and withdrawals of a compatible male contact without

affecting the electrical performance of the touchscreen. The cable to

touchscreen interface shall be capable of withstanding a straight-line pull of 10

pounds, maintained for a period of five minutes.

The cable to connector housing interface shall be capable of withstanding a

straight-line pull of eight pounds, maintained for a period of five minutes. The

cable shall be capable of withstanding a forming bend of 180° over a cylinder of

radius 0.0625 inches. This bend may be repeated up to 25 times.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 106 107

Sem comentários

Elo TouchSystems E221 Manual Página 84