Elo TouchSystems E221 Manual Página 73

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 72
A-78 IntelliTouch/SecureTouch Guide
Diagnostic Codes
AccuTouch controller power-on diagnostic codes are typically displayed when
an Elo driver is loaded, or through the Touchscreen Control Panel. The codes
will be a pair of bytes displayed in hex. Only the first byte is significant with
AccuTouch controllers.
The following table lists the bit positions defined for the byte. A 1 bit indicates a
failure. Diagnostic codes are computed by summing the value for each bit
position using hexadecimal arithmetic.
Bit Value (hex) Description
7 80 Touch microprocessor test incomplete
6 40 Reserved
5 20 Touch microprocessor test failed touchscreen may not
be connected
4 10 Nonvolitle RAM checksum test failure
3 08 RAM read/write test failure
2 04 ROM checksum test failure
1 02 Microprocessor logic/register test failure
0 01 Firmware/hardware compatibility test failure
Vista de página 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 106 107

Comentários a estes Manuais

Sem comentários